2N EasyGate - User Manual - Manual (Page 26)

21
Line reversal indication for call in progress
Function No.: -
Select call in progress signaling by telephone line polarity reversal. There is
voltage of reversed polarity on the telephone line during the whole call.
Setting options: YES/NO
Default setting: NO
Tariff pulse when call starts/ends
Function No.: -
Signaling of call start or end by tariff pulse.
Setting options:
None -EasyGate doesn't send tariff pulse as signaling of call
start/end.
Call end -EasyGate sends tariff pulse when call ends.
Call start -EasyGate sends tariff pulse when call starts.
Call start and end -EasyGate sends tariff pulse when call starts and
ends too.
Default setting: None
Tariff pulse frequency
Function No.: -
Tariff pulse frequency setting.
Setting options:
16 kHz -EasyGate transmits 16 kHz tariff pulses
12 kHz -EasyGate transmits 12 kHz tariff pulses
Default setting: 16 kHz