2N EasyGate - User Manual User Manual
Page 31
26
Serial number
Function No.:
-
EasyGate serial number - for information only (cannot be changed). Must be
used for communication with the manufacturer.
GSM operator lock
Function No.:
-
Refer to GSM & SIM Parameters.
COM enable
Function No.:
50
With this parameter you can enable/disable the serial interface function. You can
disable communication in the operating mode, maintaining the special
programming mode after power up.
Setting options: YES/NO
Default setting: YES
8.3.6. Initialization
All programmable parameters are arranged in tables according to their functions. You
can initialize either all parameters at once or one table of parameters.
For initialization via a telephone line fill in the function number according to the type
of initialization and enter the service password as the parameter.
Telephone line initialization
Function No.:
91
Initialization of all parameters necessary for the telephone line function.
Call table initialization
Function No.:
92
Initialization of all parameters related to dialed telephone number.
Initialization of GSM & SIM
Function No.:
94
Initialization of all parameters related to the GSM network and SIM card (except
for the PIN code).
SMS input initialization
Function No.:
93
Initialization of all parameters for SMS sending upon SMS input activation.
Global initialization
Function No.:
99
Initialization of all EasyGate parameters including the PIN and service password.