2N EasyGate - User Manual - Manual (Page 3)

User Manual Versions
Version Amendments to Earlier Versions
1.00 · The User Manual applies to EasyGate FW Version 1.00D.
1.01
· New parameter for dial tone setting.
· LED indications updated.
· The User Manual applies to EasyGate FW Version 1.00E
1.02
· Default setting for dial tone is continuous tone now.
· The User Manual applies to EasyGate FW Version 1.00F
1.03
· New function: tariff metering with 16 or 12 kHz pulses.
· New function: call connect and disconnect signaling by 16 or 12 kHz pulses.
· The User Manual applies to EasyGate FW Version 1.00G
1.04
· Continuous dial tone.
· Chapter 2.2 modified.
· SMS input parameters added.
1.05 · GSM gateway name modification.
1.06 · Analogue FAX support. (optionally)
Upgrade
The manufacturer continuously meets customer requirements by improving the
firmware. For the latest EasyGate processor firmware, programming tool and User
Manual see
www.2n.cz . For a detailed description of the EasyGate firmware upgrade
refer to the section devoted to the PC programming tool.