2 mechanical installation, Mounting type overview – 2N Helios IP Force User Manual
Page 14
Advertising
14
2.2 Mechanical Installation
Mounting Type Overview
Refer below for a list of mounting types and necessary components.
Flush mounting – classic bricks
What You Need:
A precisely cut hole or, optionally, the brick flush mounting
box, Part No. 9151001
Hole: (132 Ч 223 Ч 83) mm (with flush mounting box)
Hole: (112 Ч 220 Ч 70) mm (without flush mounting box)
Flush mounting – thermally insulated wall
What You Need:
Longer screws (depending on the thermal insulation
thickness)
Hole: (112 Ч 220 Ч 70) mm
Flush mounting – hollow bricks
What You Need:
Brick flush mounting box, Part No. 9151001
Hole: (132 Ч 223 Ч 83) mm
Flush mounting – plasterboard wall
What You Need:
Plasterboard flush mounting box, Part No. 9151002
Hole: 118 × 235mm
Advertising