Internal rfid card reader 125 khz, Module settings, Connection – 2N Helios IP Force User Manual
Page 29: Function
29
Module settings:
Refer to the
for details.
2N Helios IP Configuration Manual
®
Connection:
Internal RFID Card Reader 125 kHz
The
(Part No. 9151011) is used for reading
Internal RFID Card Reader 125 kHz
RFID card Ids in the 125 kHz band. This module is intended for mounting into the 2N
®
Helios IP Force model
. These
9151102CR, 9151102R, 9151101CRP and 9151101RP
models have an window, which is necessary for antenna operation. If the Internal RFID
is installed, it is not possible to install the
.
Card Reader
Additional Switch
Function:
The
Internal RFID Card Reader adds one logical input, two
2N
®
Helios IP Force
additional switches and a tamper switch to the
basic unit.
2N
®
Helios IP Force
The purpose of the tamper switch is to signal any unauthorised opening of the intercom
(to prevent a theft, e.g.). It is recommended to use the tamper switch.