Specifications – 2N Helios IP Force User Manual
Page 30
Advertising
30
Specifications:
Card reader
Compatible with EM4100 / EM4102 / HID Prox RFID cards
®
Operating frequency: 125 KHz
Minimum reading distance: 10 mm above
cover
2N
®
Helios IP Force
Relay output
Switching contact
30 V / 2A AC/DC
Active output
12 V / 700 mA transistor switched output
Logical inputs
Active mode – requires external voltage (JP2 jumper OFF)
U
-ON = min +2.5 V
IN
U
-OFF = max +1.5 V
IN
U
max = +48 V
IN
I
(U
+48 V) = max 1 mA
IN
IN
Passive mode – requires external contact only (JP2 jumper ON)
U
= approx. 8.3 V
OUT
I
= approx. 0.5 mA
LOOP
Signalling output
Internal red LED under reader window
WIEGAND interface
Off/Input/Output (as programmed)
Advertising