Surface mounting – 2N Helios IP Vario User Manual
Page 18
Advertising
18
1.
2.
3.
Surface Mounting
Drill holes according to the template included in the 2N
®
Helios IP Vario
supply. Insert the included dowels in the wall holes.
Use the hexagonal wrench included in the supply and remove the 2N
®
Helios IP
metal cover. Remove the screw in the lower part of the metal cover and
Vario
fold out the cover.
Use a cross-head screwdriver to remove the plastic cover and demount the
cover.
Advertising