1 configuration, Ip address retrieval – 2N Helios IP Vario User Manual
Page 48
48
3.1 Configuration
Use a PC equipped with any web browser to configure
:
2N
®
Helios IP Vario
Launch your web browser (Internet Explorer, Firefox, etc.).
Enter the IP address of your intercom (http://192.168.1.100/, e.g.).
Log in using the
user name and
password.
Admin
2n
You have to know the IP address of your device to log in to the integrated web server.
By default,
is switched into the dynamic IP address mode, i.e. it
2N
®
Helios IP Vario
obtains the IP address automatically if a properly set DHCP server is available in your
LAN. If no such DHCP server is available, you can operate
in the
2N
®
Helios IP Vario
static IP address mode.
If your device remains inaccessible (you have forgotten the IP address, or the LAN
configuration has changed, for example), change the LAN settings using the buttons on
the device.
IP Address Retrieval
Take the following steps to retrieve the
IP address:
2N
®
Helios IP Vario
Connect (or, if connected, disconnect and reconnect)
to
2N
®
Helios IP Vario
the power supply.
Wait for the second sound signal
.
1-button models: Press the quick dial button on the basic unit five times.
3-buttons models: Press the second quick dial button on the basic unit five
times.