AirLive WIAS-3200N v2 - Manual (Page 113)

7 Network Utilities
107 AirLive WIAS-3200N v2 User’s Manual
Destination IP/Domain: Enter desired domain name, i.e. www.google.com , or IP
address of the destination, and click Start button to proceed. The ping result will be
shown in the Result field.
Times: By default, it’s 5 and the range is from 1 to 60. It indicates number of
connectivity test.
Traceroute
Allows tracing the hops from the WIAS-3200N v2 to a selected outgoing IP address. It
should be used for the finding the route taken by ICMP packets across the network to the
destination host.
The test is started using the Start button, click Stop button to stopped test
Destination Host: Specifies the Destination Host for the finding the route taken by
ICMP packets across the network.
MAX Hop: Specifies the maximum number of hops( max time-to-live value) traceroute
will probe.
7.4 Format Database
This function allows administrator to format system's database. Click Format button to
proceed and take around three minutes to complete.
*Note: Do not interrupt during format database including power on/off as this may damage
system.