AirLive WIAS-3200N v2 - Manual (Page 27)

3 Configure Hotspot to Network
21 AirLive WIAS-3200N v2 User’s Manual
Bandwidth Control: By default, it's “Disable”. To “Enable” to use bandwidth control.
Type : Enable the desire option among “Even Distribution of Bandwidth” or
“Individual Bandwidth”
(1) Even Distribution of Bandwidth: Set users distribute Total Max. Upload/Download.
Below depicts an example for Even Distribution of Bandwidth, set Total Max.
Upload or Download to 9 Mbps, if one user access Internet, the maximum upload or
download is 9 Mbps; if three users access Internet at the same time, the maximum
upload or download is 3 Mbps by each user.
Total Max. Upload: The Total Max. Upload is in the range of 0~102400 Kbit/s, 0
indicates unlimited, default is 512 Kbit/s
Total Max. Download: The Total Max. Download is in the range of 0~102400 Kbit/s, 0
indicates unlimited; default is 512 Kbit/s.
*Note: If the system does not enable any authentication function, all users of the
bandwidth control will be based by the “Total Max. Upload” and “Total Max. Download”
If the system enable authentication function and user in the privilege list, the user of
bandwidth will be uncontrolled by Even Distribution of Bandwidth
(2) Individual Bandwidth: Set each users Individual Upload/Download. Below depicts an
example for Individual Bandwidth, set Group Upload or Download to 6 Mbps and
Individual Upload or Download to 3 Mbps, if one user access Internet, the maximum
upload or download is 3 Mbps; if three users access Internet at the same time, the
maximum upload or download is 3 Mbps by each user.