AirLive WIAS-3200N v2 - Manual (Page 94)

5 Configure Wireless Connection
AirLive WIAS-3200N v2 User’s Manual
88
*Note: IAPP only used on WAP2 security type. Only one of VAPs can be enabled
Maximum Clients: Enter maximum number of clients to a desired number. For
example, while the number of client is set to 32, only 32 clients are allowed to connect
with this VAP.
Service Domain: Select the desired Service Domain from the drop-down list.
Security Type: Select the desired security type from the drop-down list; the options
are WEP, WPA-PSK, WPA2-PSK, WPA-Enterprise, WPA2-Enterprise and WEP
802.1X.
Disable: Data are unencrypted during transmission when this option is selected.
WEP: WEP, Wired Equivalent Privacy, is a data encryption mechanism based on a
64-bit, 128-bit or 152-bit shared key. Select WEP as the security type from the drop
down list as desired.
1) Key Length: Select the desire option are 64 bits, 128 bits or 152 bits from
drop-down list.
2) WEP auth Method: Enable the desire option among Open system or Shared.
3) Key Index: Select key index used to designate the WEP key during data
transmission. 4 different WEP keys can be configured at the same time, but only