AirLive WIAS-3200N v2 - Manual (Page 36)

3. Configure Hotspot to Network
AirLive WIAS-3200N v2 User’s Manual
30
3.7 Time Server
System time can be configured via this page where manual setting and NTP server
configuration are both supported. Please click on System > Time Server and follow the
below setting.
3.7.1 System Time
Display the current time of the system.
3.7.2 Setup Time Use NTP
To enable Network Time Protocol, NTP, to synchronize the system time with NTP server.
Default NTP Server: Select the NTP Server from the drop-down list.
Time Zone: Please set a time zone from where the accurate time can be supplied,
(GMT+08:00) Taipei for example.
Daylight saving time: Enable Daylight saving time from where the accurate time
needed.
*Note: If Time server setting selected in “Setup Time User NTP”, please verify system's
Default Gateway and DNS setting first.