AirLive WIAS-3200N v2 - Manual (Page 20)

3. Configure Hotspot to Network
AirLive WIAS-3200N v2 User’s Manual
14
IP Address: The IP address of the WAN port.
IP Netmask : The Subnet mask of the WAN port.
IP Gateway: The IP address of the host router which resides on the external network
and provides the point of connection to the next hop towards the Internet. This can be
a DSL modem, Cable modem, or a WISP gateway router. AC-920X will direct all the
packets to the gateway if the destination host is not within the local network.
Gateway IP address should be from the same address space (on the same network
segment) as the AC-920X's external network interface.
3.2.2 Dynamic IP
This configuration type is applicable when the WIAS-3200N v2 is connected to a network
with the presence of a DHCP server; all related IP information will be provided by the
DHCP server automatically. If the IP Address does not assigned from DHCP server, the
system need manual connect to DHCP server.
Hostname : The Hostname of the WAN port
3.2.3 PPPoE
This configuration type is applicable when the WIAS-3200N v2 is connected to a network
with the presence of a PPPoE server.
User Name : Enter User Name for PPPoE connection
Password : Enter Password for PPPoE connection
MTU: MTU stands for Maximum Transmission Unit. For PPPoE connections, you may
need to set the MTU setting in order to work correctly with your ISP. Default is 1492
bytes.