C.B.S. Scientific TTGEK-2401-220 - Manual (Page 17)

TTGE Instruction Manual, version 8/30/2011
17
www.cbsscientific.com
3.2 Heater/Stirrer Set-Up and Programming – continued
3.2n Menu Structure
Main Menu Item
Associated
Sub-Menu Items
Choices / Ranges / Comments
Timer
Set
Beep 00:00:00 to 99:59:59
On or Off
Program 1
Program #
Program Steps
Program Loops
Step #
Step Setpoint
Minutes/Seconds
View Profile 1 to 10
1 to 50
1 to 99
1 to 50
–50° to 200°C (-50° to 392°F)
0 second to 999 minutes, 59 seconds
Displays temperature profile of program.
Run Program 1
Program #
Program Status 1 to 10
Start, Starting, Running, Paused, or Completed
Preferences
Readout
Units
Sound
Language
Program
1
#, #.#, or #.## (0, 1, or 2 decimal places)
°C or °F
1 to 100
English / French / German / Spanish
Time / Temperature
Limits / Alarms
Limit High
Alarm High
Alarm Low
Limit Low -50° to 200°C (-58° to 392°F)
-50° to 200°C (-58° to 392°F)
-50° to 200°C (-58° to 392°F)
-50° to 200°C (-58° to 392°F)
Pump/AutoTune
Pump speed
AutoTune Maximum / Fast / Medium / Slow / Minimum
Displays status of AutoTune procedure
Temperature
Trend
No sub-menu; displays
temperature profile
2 minutes to 48 hours
Probe 1
Internal / External
Maximum Setpoint
Differential
Probe currently selected is shown
Only displayed when External is selected
1° to 10°C range
Instrument
Contrast
Timeout
Baud Rate 00 to 30
5 to 60 seconds
110 / 300 / 600 / 1200 / 2400 /4800 / 9600 /
14400 / 19200 / 38400 / 57600
1. These Main Menu items are present on Programmable Controllers only.
2. This Main Menu item is present on Refrigerating/Heating Circulators only.
NOTE: There are additional displays after “Instrument “ in the Main Menu. However, there are no user-settable
functions on these displays.