C.B.S. Scientific TTGEK-2401-220 - Manual (Page 24)

24
www.cbsscientific.com
3.2 Heater/Stirrer Set-Up – continued
3.2w Setting the Display Contrast and Timeout
Display Contrast and Display Timeout appear as sub-menu items under Instrument in the Main Menu. These menu
items allow you to change the readability of the LCD and set the length of time, which can pass without menu activity
before the display will revert to the main operational display.
NOTE: When Contrast is selected, the display contrast will change as the Select/Set Knob is rotated. You must
press the Select/Set Knob to accept the displayed contrast value; if you press the ESC Button or allow the display to
timeout without pressing the Select/Set Knob, the display contrast value will remain where it was previously set.
3.2x Setting the Baud Rate
This sub-menu selection also appears under Instrument in the Main Menu. It allows you to set the baud rate at which
data will be transmitted over the RS232 interface.