CCTV Camera Pros Geovision 8.4 Multicam Digital Surveillance System User Manual
Page 107
Configuring Main System
91
1
1. Select
Tour Schedule on the Camera Mapping Setup dialog box (Figure 1-70), and click the
Setting button. This dialog box appears.
Figure 1-72
2. Select
Span 1, specify a period of time, and select a camera behavior to be activated during the
defined time period.
3. Set
another
span.
4. If you want to apply a different setting to weekends, select Weekend Apply and select a camera
behavior. And define whether the weekend includes Saturday or not.
5. Click
OK to apply the settings.
Note: It is required to set more than one span so that a specified camera behavior will only run in the
defined time frame. Otherwise, you can select the Auto, Preset or Multi Position Tour option (see
Figure 1-70) to configure the idle protection.