3 stopping video lost watchdog – CCTV Camera Pros Geovision 8.4 Multicam Digital Surveillance System User Manual
Page 128
Advertising
112
1.20.3 Stopping Video Lost Watchdog
When the video signal is weak, the software watchdog will try to recover the lost video by restarting the
system and even rebooting the computer. If the video lost watchdog feature is not required, you have
the option to disable it.
To disable this feature, click the Configure button (No. 14, Figure 1-2) , point to Tools, select Video
Signal Diagnostic, and select Disable Video Signal Weak Watchdog.
Note: This option is only available for GV-600, 650, and 800 Cards.
Advertising