CCTV Camera Pros Geovision 8.4 Multicam Digital Surveillance System - Manual (Page 184)

168
6. Click […] after Video Snapshot for further setup.
Figure 3-25
„ Frames: Specifies how many frames every second the system will save. By default, the
system will take 2 frames every second when the monitoring starts.
„ Save as JPEG file: Saves the images in JPEG format. Otherwise, you can only access the
snapshots by using Quick Search and ViewLog players.
„ Enable I/O Trigger: Takes snapshots only when the assigned input device is triggered.
7. To activate the function at certain times only, click the Schedule button and select Active
Schedule. For details, see Video Analysis Schedule later in this chapter.
8. Click OK to apply the settings
9. Start monitoring to take snapshots.