CCTV Camera Pros Geovision 8.4 Multicam Digital Surveillance System - Manual (Page 98)

82
1.10.2 Setting Alert Notification
1. Click the Configure button (No.14, Figure 1-2), select General Setting, and select System
Configure. The System Configure dialog box appears.
2. To change the default alert method, click the Arrow button in the Send Alerts Approach section,
and select Hotline.
Figure 1-65
3. To define the alert event, select Send Event Alerts in the Monitor Option section, click the
Arrow button and select the events for which hotline alerts will be sent (Figure 1-3).
Figure 1-66
4. To send hotline alerts when motion is detected, click the Camera Record Setting tab on the
System Configure dialog box and select Invoke to Send Alerts. You can select specific cameras
for this application or click the Finger button to apply the setting to all the cameras.
Figure 1-67