5 twindvr settings – CCTV Camera Pros Geovision 8.4 Multicam Digital Surveillance System User Manual

Page 532

Advertising
background image


516

11.2.5 TwinDVR Settings

Network Card Settings

In Figure 11-9, click the Setting button, and then select Network Setting to display the following

dialog box. The Network Setting option is only necessary when your TwinDVR has more than one

network card. Select Assign IP and select one network card. This will automatically bring up Blind IP

of the network card. The network card will be used for connecting to TwinServer; the other network

card will be assigned for connecting to Internet. If you want the TwinDVR to automatically reconnect to

TwinServer, select Retry until connected and set the time interval.

Figure 11-11 TwinDVR Setting

System Settings

In Figure 11-9, click the Setting button, and then select System Configure to display the following

dialog box. The option is only available when TwinDVR is connecting to TwinServer.

Figure 11-12 System Settings

[Startup Setting]

„

Extended Server: Activates Extended Server on TwinDVR startup.

„

WebCam Server: Activates WebCam Server on TwinDVR startup.

[System Setting]

„

TwinDVR resume: Resumes TwinDVR connection when the system shuts down unexpectedly.

Advertising