13 system configuration – CCTV Camera Pros Geovision 8.4 Multicam Digital Surveillance System User Manual
Page 425
Remote Viewing
409
8
8.6.13 System Configuration
Click the Configure button (No. 9, Figure 8-34) to display the following window. At the left panel, select
General Display, Video and Audio or Network to start your configuration.
Figure 8-42 The Configure Window
[General Display]
Resolution: Select the Multi View screen resolution. The options available here depend on the
monitor resolution of your PC.
Initial Screen: Select screen divisions at startup.
Polling Time: Specify the camera polling time from 1 to 60 seconds.
Server Status Refresh Time: Specify the frequency to update the host information.
Camera Status Refresh Time: Specify the frequency to update the camera information.
Active Camera: Select the maximum number of screen divisions allowed on the Multi View.
Fast Key: Click the View button to display the fast key table of the Multi View.
[Video and Audio]
Folder Path: Specify a path to save recorded files.
Max Video Clip: Specify the maximum time length of each recorded file.
Audio: Select the audio quality to be Normal, Real Time or Smooth. For the details of the three
quality options, see [Audio Configure] in Video and Audio Configuration in the section of Single