CCTV Camera Pros Geovision 8.4 Multicam Digital Surveillance System User Manual
Page 617
Useful Utilities
601
11
7. Start monitoring. When motion is detected or the input device is triggered, the live video will pop
up for alert.
Setting Pop-up Positions
When you select Random Position of Camera, you can decide the positions for pop-up cameras.
Fixed Position of Camera: The cameras pop up in their assigned positions. To assign positions,
select Screen Division. Then drag and drop the cameras number to the desired potions on the
divisions.
Random Position of Camera: The positions of pop-up cameras are based on the sequence order
of triggers. There are two modes for this position:
1. Cascade Mode: This mode can avoid the same cameras popping up on different monitors.
This is suggested to be used when multiple monitors are placed close to each other.
Example:
Camera 1, Camera 2, Camera 3, Camera 4 and Camera 5 are assigned for alert popup on
both Monitor 1 and Monitor 2. Monitor 1 is set at 4 screen divisions. When the five cameras
are triggered at same time, the first 4 cameras show up on Monitor 1 and the 5th on Monitor
2.
2. Parallel Mode: This mode allows the same cameras simultaneously pop up on different
monitors. This is suggested to be used when multiple monitors are placed in separate rooms.
Example:
Camera 1, Camera 2, Camera 3 and Camera 4 are assigned for pop-up upon motion
detection on both Monitor 1 and Monitor 2. When the four cameras are triggered at the same
time, they will show up simultaneously on both Monitor 1 and Monitor 2.
2
1
3
4
5
Monitor 1
Monitor 2
2
1
3
4
2
1
3
4
Monitor 1
Monitor 2