CCTV Camera Pros Geovision 8.4 Multicam Digital Surveillance System - Manual (Page 632)

616
11.17.4 Mapping IP Cameras
You can map IP cameras to the channels of GV-System by using the GV IP Device Utility. Click the
NVR Camera Settings tab on the GV IP Device Utility window and the following window appears:
1
2
3
4
5
Figure 11-99
The buttons in the Dispatch Panel toolbar:
No. Name Description
1 Add Adds a new tab to create another set of IP camera settings.
2 Delete Deletes the selected tab.
3 Delete Selection Deletes the selected IP camera from the Dispatch Pattern section.
4 Clear All Clears all IP cameras in the selected tab.
5 Export Exports the IP camera mapping settings.
To map IP cameras to the channels of GV-System:
1. Drag one or multiple IP devices from the Camera List to the desired camera channels in the
Dispatch Pattern section.
2. By default, the login username and password for the IP camera both are set to admin. If the
added IP camera does not use the default settings, you need to right-click the IP camera in the
Dispatch Pattern section and select Login User Information to modify its logon information.
3. You can use the Export button to export the IP camera mapping settings and then import the
settings back into the Main System. See Camera Mapping through IP Device Utility in Chapter 2.