CCTV Camera Pros Geovision 8.4 Multicam Digital Surveillance System - Manual (Page 353)

Point-of-Sale (POS) Application 7
„ Printer Type: Select Serial Port, Parallel Port or TCP/IP Port that the POS device belongs
to.
„ Device: Select the number of the POS device if multiple POS devices are connected, and
rename it if necessary.
„ Mapping Camera: Assign the POS device to a camera screen.
„ POS Module: Select the printer attached to the POS device.
If it’s not Epson, select General for other brands.
If the printing is the graphic mode, select GraphMode. For Graphic mode applications, see
the Graphic Mode POS Device section above.
If the printing is the text mode and a GV-Data Capture Box is not used for integration, select
POS Text Sender. For this application, see Windows-Based Direct POS Integration earlier in
this chapter.
„ COM Port: Select the COM port that the POS device is connected to.
„ The parameter/IP address button:
For the serial type of POS device, click the button to configure Baud Rate, Data Bits, Parity,
and Stop Bits of the POS device.
For the TCP/IP type of POS device, click the button to configure IP address, domain name or
device name of the POS device.
„ Cash Drawer Open Signal: This option is only available when an input module is configured
in the Main System. Assign the input module connected to the cash drawer. Every time when
the cash drawer is opened, a signal will be sent to the Main System and recorded in System
Log for later retrieval.
„ Use Codepage Mapping: This feature is to support special characters and symbols display.
For details, see Codepage Mapping later in this chapter.
„ Trace Mode: Check this item only after getting the recommendation from our technical
support staff.
3. After above settings, click Add to add the POS device to the Main System.
337