CCTV Camera Pros Geovision 8.4 Multicam Digital Surveillance System User Manual
Page 141
Advertising
Hybrid and NVR Solution
125
2
6. Click
Apply. The IP camera is added to the list.
7. To change the preview and recording resolution, right-click the listed camera and select Change
Resolution. You can also change the codec by selecting Change preview codec and Change
record codec.
Note: The codec and resolution selected here will override the configurations set up in the Web
interface of the IP camera.
8. Right-click the listed camera, and select Display position to map the IP camera to a channel on
the GV-System.
Figure 2-4
9. The Status column now should display “Connected”. Click OK.
Tips: You can access the configuration interface of the connected IP device by right-clicking the IP
device and selecting Remote Camera Setting.
Advertising