CCTV Camera Pros Geovision 8.4 Multicam Digital Surveillance System User Manual
Page 349
Advertising
Point-of-Sale (POS) Application
7
5. Select
POS Data Sender from Windows Start Menu. This dialog box appears.
Figure 7-6 POS Data Sender
6. Select
Serial Port and select the COM port that the POS device is connected to.
7. Click
Start Service to send graphic data to GV-System.
The GV-System must be configured and ready for this application. To set up the GV-System, see POS
Device Setup later in this chapter.
333
Advertising