CCTV Camera Pros Geovision 8.4 Multicam Digital Surveillance System - Manual (Page 444)

428
Connecting to GV-System
Once GV-GView V2 is installed on your PDA, you can use it to monitor your GV-System. Make sure
your PDA has wireless LAN adapter properly in place with access to the Internet.
1. Execute GV-GView V2 on your PDA.
Figure 8-54
2. Click the button located at the lower left corner. The login screen appears.
Figure 8-55
3. Enter the IP address of your GV-System, port value (default value is 8866), a username and a
password. Then click OK.
4. Once the connection is established, the live video will appear.