17 advanced scene change detection, Advanced scene change detection – CCTV Camera Pros Geovision 8.4 Multicam Digital Surveillance System User Manual
Page 212
196
3.17
Advanced Scene Change Detection
Compared to Scene Change Detection that can only be applied in the indoors, the advanced version
of Scene Change Detection can be applied in the outdoors. The Advanced Scene Change Detection
detects and prevents any changes of scene, viewing angle or focus clearness made by malice.
Note:
1. This function is only available when an AVP dongle is used. Up to 16 cameras can be configured
for this application.
2. It is highly recommended not to use Advanced Scene Change Detection and Scene Change
Detection together.
1. Click
the
Configure button (No. 14, Figure 1-2), click Advanced Video Analysis, and select
Advanced Scene Change Detection Setting.
2. Select the desired camera(s) to be configured, and click Configure. This dialog box appears.
Figure 3-50
3. Select a camera from the Camera Selection drop-down list, and configure these settings:
Mask Region: If necessary, mask off the area on the camera view where motion will be
ignored.
Sensitivity: Adjusts detection sensitivity. The higher the value, the more sensitive the system
is for changes in the camera view.