6 abnormal transaction alerts – CCTV Camera Pros Geovision 8.4 Multicam Digital Surveillance System User Manual
Page 358
342
7.6 Abnormal Transaction Alerts
When an abnormal transaction of the specified transaction item occurs, this function can automatically
activate the output device and send out assigned E-Mail/SMS/Pager alerts. To set up this function,
follow these steps:
1. Follow the instructions in POS Filed Filter earlier in this chapter to set up a transaction item first.
2. In the POS Capture Data Setting dialog box (Figure 7-12), click the Loss Prevention Setting
button. This dialog box appears.
Figure 7-15 Loss Prevention Setting
[Alarm Conditions] Check this option and define the price range for an alarm condition. For this
example, when the price amount in a transaction is great than or equal to (>=) 10000 and less
than or equal to (<=) 100000, the assigned alarm will be activated.
[Alarm Output] Assign an installed output module for the application.
[Alert Message] Enter a desired alert message. To set up a notification type (E-Mail/Hotline/SMS),
refer to Send Alerts Approach in Chapter 1.