Comelit MT CT 01 - Manual (Page 13)

GROUP S.P.A.
MT CT 01 12
par. 6.2.2 of NT1 PLUS manual
• carry out the assignment command: * 05*1#
after the vocal confirmation of command acceptance, you can reconnect the line telephone cable:
• disconnect the mains power supply
• open the terminal board compartment
• connect the line telephone cable
• close the terminal board compartment
• connect the mains power supply
NOTE: the above steps refer to the AETHRA installation manual of NT1 plus rev. 0.
Fig. 3: installation of second line expansion
A
B
A
B