Comelit MT CT 01 - Manual (Page 51)

GROUP S.P.A.
MT CT 01 50
8.4.4 Association of entry phone call buttons – Partitions
8.5 H
OME
/ O
FFICE
O
PERATION
If the switchboard is set in HOME mode, i.e. with direct access to the outside line activated, to access the
“waiting for commands“ stage, it is necessary digit button R.
The example below explains how to make an internal call.
8.6 C
HARACTERISATION OF BRANCH
a = 1 (Partition 1)
2 (Partition 2)
b = 1÷4 (List of branches)
COMMAND PARAMETER VALUES
DEFAULT VALUES: Odd buttons on partition 1. Even buttons on partition 2.
EXAMPLE: 13 1 12 # to associate buttons 1 and 2 with partition 1
13 2 34 # to associate buttons 3 and 4 with partition 2
a = 1 (Partition 1)
2 (Partition 2)
b = 0 (Home)
1 (Office)
COMMAND PARAMETER VALUES
DEFAULT VALUES: Both partitions on Office.
EXAMPLE: 14 1 0 # to define partition 1 in Home mode
14 2 1 # to define partition 2 in Office mode
ab = 01÷08 (branch number)
c = 0 (Day)
1 (Night)
d = 0 (Normal branch)
1 (OP)
2 (Fax)
3 (Telephone + Fax)
4 (Answer phone)
COMMAND PARAMETER VALUES
DEFAULT VALUES: Branch 1 as OP both in DAY and NIGHT scenario.
The other branches as normal user both in DAY and NIGHT scenario.
EXAMPLE: 20 02 0 1 # to define branch 02 as OP during the DAY scenario
1 3 a b … #
1 4 a b #
2 0 a b c d #
Bla bla
STANDARD BCA TELEPHONE
Freeing outside line – Waiting for commands – Internal call
Button 8 followed by the extension
desired from 01 to 08 (e.g. 04)
I lift the
receiver
Invitation tone
to select from
outside line.
FLASH
button, R
Continuous tone of
Waiting for commands.
Freeing outside line.
8 0 4
EXAMPLE
Conversation
The extension
called rings
Call
tone Conversation
R