Mt ct 01 – Comelit MT CT 01 User Manual
Page 44
MT CT 01
MT CT 01
43
6.6 E
NTERING A SPEED DIALLING NUMBER
(OP)
The switchboard directory has a capacity of 40 numbers with a maximum of 20 digits each. By means of
software Art. 1296 it is possible to associate a name with a maximum of 16 alphanumerical characters.
These numbers are subject to checks imposed by the filters on outgoing calls.
In the case of partitions, each will have 20 numbers available.
If you want to enter some the speed dialling numbers not subject to any type of filter, called SOS numbers, it is
necessary to proceed as follows:
6.7 D
O NOT DISTURB
By activating this function, the branch does not ring for calls coming from the outside line and from the
entry phone.
When the receiver is lifted an attention tone is received to indicate that the function is active.
6.8 D
IVERSION TO EXTENSION
The branch can divert the calls for him towards another extension immediately or timed after five rings,
corresponding to about 25 seconds.
a b = 01-40 (speed dialling number index)
c = telephone number (max 16 digits)
COMMAND
PARAMETER VALUES
7
6
a
b
c
#
…
a b = 01-40 (speed dialling number index)
c = SOS telephone number ( max 16 digits )
COMMAND
PARAMETER VALUES
7
6
a
b
c
#
…
a b = 01-08 (branch)
a b = 01-08 (branch)
DESCRIPTION
COMMAND
PARAMETER VALUES
7
7
4
7
7
5
Deactivation
Activation of immediate diversion
Activation of timed diversion
a
b
7
7
6
a
b
*
DESCRIPTION
COMMAND
PARAMETER VALUES
7
7
0
7
7
1
7
7
2
7
7
3
Disattivazione non disturbare
da linea urbana
Activation do not disturb
from outside line
Deactivation do not disturb
from entry phone call
Activation do not disturb
from entry phone call