Comelit MT CT 01 - Manual (Page 56)

MT CT 01
MT CT 01 55
10.2 R
EMOTE
T
ELE
-
CONFIGURATION
Remote tele-configuration is carried out by connecting the PC to a “dedicated” PBX called bridge (or
master). The switchboard to be configured is reached by means of an external outside line as shown in the
following figure:
This type of remote configuration is reserved exclusively for the COMELIT assistance centres.
11 SOFTWARE FOR LA REMOTE MANAGEMENT LOCAL
11.1 S
TARTUP
The programme for the remote management is run by selecting the ConfigMngt application as shown in the
figure:
Selection of the serial used for connection to the PBX is required.
This operation is carried out starting from the “Select Operation” pull-down menu and by activating the “Selection
Serial Line and Speed” option. Select the port in use in the window which appears and confirm with “OK”.
TELECOM
RS-232 Card to be
inserted in the switchboard
PC
USB-RS232 cable (Optional)
PBX
Master
or bridge
Analog or ISDN Line
Switchboard PBX
Analog or ISDN Line