Comelit MT CT 01 - Manual (Page 29)

GROUP S.P.A.
MT CT 01 28
From the RIDO situation it is possible to generate a Second intermediate call:
From the Second intermediate call it is not possible to have a conference with three people. Branch A can
return to the First intermediate call situation by making a transfer with/without offer of D onto E.
EXAMPLE: Transfer with offer.
If branch A decides to cancel the Second intermediate call, returning to the first one, they can proceed as
follows:
4.16 P
ARKING AN OUTSIDE LINE
This means the possibility by a branch of parking the outside line previously put on hold.
It takes place in the following way:
- The branch ( example 803 ) is in conversation with the outside line.
- 803 puts the outside line on hold by means of button R.
- 803 dials command 60 receiving the confirmation tone. It is possible to carry out other operations. By hanging
up the outside line will not be recovered.
- 803 can recover the parked line by keying in code 63.
- If the line is kept parked for more than 90 seconds, 803 will receive a warning call.
Conversation
D with E
D E
A - D conversation
with B and C on hold
A presses:
FLASH button, R
STANDARD BCA TELEPHONE
RIDO Putting D on hold Putting D on hold and call to E Second intermediate call
A - E conversation
with B - C - D on hold
R
E
A
B
C
D
D
A B
C
Button 8 followed by the
extension desired from
01 to 08 (e.g. 04) (E)
8 0 4
EXAMPLE
Music on hold
on D
Extension 04
(E) rings
A - E conversation
with B - C - D on hold
STANDARD BCA TELEPHONE
Second intermediate call Transfer of D onto E First intermediate call
Conversation A with B - C and
D with E. C remains on hold
Extension A
rings
E
A
B
C
D
A puts the receiver
down
A lifts
the receiver
C
A B
D E
Conversation
A with D
A D
A - E conversation
with B - C - D on hold
STANDARD BCA TELEPHONE
Second intermediate call A releases E returning to RIDO A releases D First intermediate call
Conversation A with B and
C on hold
A puts the
receiver down
Extension A
rings
E
A
B
C
D
C
A B
A dials
sequence R5
R 5
DESCRIPTION COMMAND PARAMETER VALUES
Parking the outside line
Recovery of parked outside line
6 0
6 3