Comelit MT CT 01 - Manual (Page 52)

MT CT 01
MT CT 01 51
8.7 E
NABLING
/ D
ISABLING USE OF LINES
8.7.1 Enabling
8.7.2 Disabling
8.8 D
IRECT ACCESS TO OUTSIDE LINE
8.9 D
EFINING NUMBER OF RINGS FOR ENTRY PHONE CALL
ab = 01÷08 (branch number)
c = 0 (Day)
1 (Night)
d = 1-2 (List of outside lines to be enabled; 1 digit)
COMMAND PARAMETER VALUES
DEFAULT VALUES: All the branches enabled to use the lines both in DAY and NIGHT scenario.
EXAMPLE: 21 02 0 1 # to enable outside line 1 on branch 02
2 1 a b c d … #
2 2 a b c d … #
ab = 01÷08 (branch number)
c = 0 (Day)
1 (Night)
d = 1-2 (List of outside lines to be disabled; 1 digit)
COMMAND PARAMETER VALUES
DEFAULT VALUES: All branches enabled to use the lines both in DAY and NIGHT scenario.
EXAMPLE: 22 02 0 2 # to disable outside line 2 on branch 02
ab = 01÷08 (branch number)
c = 0 (Direct access disabled)
1 (Direct access enabled)
COMMAND PARAMETER VALUES
DEFAULT VALUES: All branches without direct access to the outside line
EXAMPLE: 25 02 1 # to enable direct Access to the outside line on branch 02
2 5 a b c #
ab = 01÷08 (branch number)
c = 0 (Day)
1 (Night)
d = 3÷9 (Number of rings)
COMMAND PARAMETER VALUES
DEFAULT VALUES: All Branches with call with 3 rings both in DAY and NIGHT scenario.
EXAMPLE: 26 01 0 5 # to set the number of entry phone call rings to 5 on branch 01
2 6 a b c d #