Comelit MT CT 01 - Manual (Page 7)

GROUP S.P.A.
MT CT 01 6
D
ESCRIPTION OF THE MAIN FUNCTIONS
PARTITIONS:
This is meant as the possibility of distributing the switchboard resources over 2 distinct systems called
PARTITIONS. Outside lines, telephones branches or telephone call buttons can be associated to each one to
allow the same living unit to be divided into two distinct areas.
GROUPS OF BRANCHES:
This is meant as the possibility of dividing the telephone branches connected to the switchboard into groups. It
is possible to define up to a maximum of 5 of these, where a branch can belong to different groups.
(See paragraph 8.10 to create a group, see paragraph 2.5 for the call.)
CHARACTERISATION OF THE TELEPHONE BRANCH: (See paragraph 8.6)
The telephone branch connected to the switchboard can be configured so that it is recognised as:
- Normal BCA telephone
- Operator Post telephone. This has authorisation to carry out all enablement / disablement operations of the
switchboard services (COURTESY MESSAGE - FAX RECOGNITION – DISA etc…)
- Fax. The incoming calls recognised as Fax will be routed over this branch.
- Fax Telephone. Incoming calls of both Fax and vocal type are routed over this. It is a configuration suitable
for multi-purpose apparatus.
- Answer phone
DAY / NIGHT SCENARIOS:
It is possible to establish two operating scenarios, defined as DAY and NIGHT SCENARIO, which differ in:
- Different configuration of the incoming or outgoing outside lines per individual the branch.
- Different distribution of the entry phone calls over branch telephones.
- Different characterisation of the extension branches.
- Different activation of the COURTESY MESSAGE – ENTRY PHONE FOLLOW-ME and LINE-TO-LINE
FOLLOW-ME services.
Passing from one scenario to the other takes place manually on keying in a command (See paragraph 5.1), or in
automatic mode according to times established by the user (See paragraph 5.2).
HOME / OFFICE OPERATION: (See paragraph 8.5)
It is possible to set the switchboard so that it functions in HOME or OFFICE mode:
- HOME: this simplifies the call operations on an outside line, reply for absent and call capturing. It is
recommended for home applications.
- OFFICE: this is the mode recommended for office and company applications and is the factory setting of the
switchboard.
DISA:
This is the service allowing automatic routing of the call from the outside line. The caller can select the
branch or groups of branches to converse with directly by means of a DTMF code (See paragraph 5.5).
COURTESY MESSAGE:
This is the service for which the switchboard gives a pre-recorded “welcoming message” pre-recorded, when a
call arrives on the outside or door entry line (See paragraph 5.3).