INFICON Ecotec E3000 Multigas-Sniffer-Leak Detector - Manual (Page 34)

34
6 Operation
Tr
an
sl
ation
o
f the
o
rig
in
al
operatin
g
in
str
u
ct
io
ns
Ecot
ec E3
000,
k
in
a
22en
1
-r
, 1
407
RS-232 protocol
 ASCII
 Diagnosis
 Printer Auto
 Printer Manual
ECO-Check If you do not use an ECO-Check calibrated leak, you should choose “Deactivate” here.
Otherwise, warning 71 “No communication with ECO-Check” will be issued at every start
of the Ecotec E3000.
If you use an ECO-Check calibrated leak, you can set up a warning for the intended time of
use here: 14/30/60/90 days.
6.4 Settings for the measurements
With delivery, the data are programmed for the following gases and the measurement
results are shown below each other in the display:
 R134a
 R22
 R600a
 He
The gas selection can be changed at any time.
6.4.1 Selecting the gas, changing gas parameters, activating
measurement
You can access the settings via the main menu
► Select “Measuring parameters”
Fig. 19: Gas information for the measurement
The display shows:
 four gases
 the respective mass position
 the respective trigger value
 the addition “Deactivated” if the associated gas is currently not searched for, see below.
You can also define your own gas with the key “Gas def.”, see “6.4.5 Setting a user-defined
gas”, page 42 .
Press the key to the right of the gas whose parameters you want to change. The window
“Measuring param. gas …” will open.