INFICON Ecotec E3000 Multigas-Sniffer-Leak Detector - Manual (Page 71)

8 Maintenance
71
Tr
an
sl
ation
o
f the
o
rig
in
al
operatin
g
in
str
u
ct
io
ns
Ecot
ec E3
000,
k
in
a
22en
1
-r
, 1
407
8 Place the plastic container in the bore with the soaked liner first and close it with the
aluminum plug.
9 Tighten the plastic screw again. Ensure that the o-ring is placed correctly in the groove
of the plastic screw and that the bore is lined up properly.
10 Confirm the work, see “Confirm maintenance”, page 65 .
8.2.3 Replacing mains fuses
The fuses are behind a flap near the mains plug. They are in two slots.
The mains fuses are available with order no. 200 000 914. Two identical fuses must be used
at all times.
1 Lever out the cover of the mains plug to the right with a screwdriver.
Fig. 51: Levering out cover to the right
2 Pull out the two slots and replace the fuses.
Fig. 52: Slot with fuse
3 Push the slots back in. Ensure that the arrows point up.
4 Close the flap.
Danger to life due to electric shock
Inside the device there are voltages of considerable magnitude. Touching parts where
electric voltage is applied can result in death.
► Disconnect the device from the power supply prior to any maintenance work. Make
sure that the electric power supply cannot be reconnected unauthorized.