JUMO PCA Communications Software PCC (B 70.9702.0) - Manual (Page 33)

33
5 Device Management
After selecting the interface, the next step is to make the entries for the time
settings (for the automatic read-out of data) and the archives (folders and
names of the files in which the data will be stored).
Control signal RS232 If the RS232 interface
on the device is used.
RS232 setup interface
(TTL) If the setup interface on
the device is used.
RS422-RTS If the RS422/485
interface on the device
is used.
Recommendation: Use
a Spectra converter with
an automatic transmit/
receive changeover.
RS422-DTR
RS485-RTS
RS485-DTR
RS232/RS485
adapter cable Only for internal
test purposes.
H
Not all devices support setting up a connection via the setup
interface. In this case, please use another interface on the device
in question.
H
Please consult the Operating Instructions of the relevant device for
information about connecting and configuring the interface on the
device.
H
The connection to a device of type LOGOSCREEN nt can also be
made via Internet.
v Chapter 5.6 "Connection via PROXY server"