JUMO PCA Communications Software PCC (B 70.9702.0) - Manual (Page 42)

6 Time Settings
42
I
Cycle type:
Periodic Defines the type and method for retrieving or reading out raw data.
A
It depends on the specific device whether, when using an Ethernet
connection via TCP/IP, only one program from the PC software
components can operate through the interface. If only one program
can operate, other programs can still continue to communicate with
other devices.
Example:
PCC is used to access a paperless recorder (Device 1) via TCP/IP.
PCS (Security Manager) can be used to access a different paperless
recorder (Device 2) via TCP/IP.
Active ( ):
Data will only be read; the memory alarm
is not affected
The following functions
are available:
Setting for retrieval intervals:
The settings “2” and “hours” mean:
data will be retrieved every 2 hours
Inactive ( ):
The time interval does not start to run
until the read-out procedure is finished.
Active (
):
The time interval starts to run at the start
of read-out.
If the read-out takes longer than the time
interval, then the next whole multiple of
the interval is used.
Operating period: active
Inactive (
):
The operating period is the relevant factor for the time interval. At the end of the
operating period, the remaining time of an interval is carried forwards to the start of
the next operating period.
Active (
):
At the end of the operating period, the interval continues in a 24-hour rhythm.
Operating period: inactive
If the operating period is inactive, this function has no effect.