JUMO PCA Communications Software PCC (B 70.9702.0) - Manual (Page 89)

89
9 FAQs
FAQ 1 Why can’t I see new devices that I created with the Setup software in the
PCC software (which had already been started)?
Answer Click on the menu function View ➔ Update – the PCC software will then
accept the new devices.
FAQ 2 What is the difference between “Retrieve raw data” and “Read out raw
data”?
Answer “Read out raw data ” does not affect the memory alarm of a device. On the
other hand, “Retrieve raw data” does affect the memory alarm. After the data
has been retrieved, any memory alarm that is present will be canceled.
FAQ 3 Why do some devices, e.g. LOGOSCREEN or IMAGO 500 (all the devices
with Type 1 memory) set the memory alarm during the read-out of raw
data?
Answer In the navigation tree, activate the option “Only read data that has not been
retrieved yet” in the setting for “Times” in the “Advanced” tab.
Caution: When using manual read-out, you cannot make any further selection
of the quantity of data in this way.
FAQ 4 What is meant by Device Type 1 and Device Type 2?
Answer Device Type 1 means devices that do not have a CompactFlash memory card
for retrieving the data from the device.
These are, for example, LOGOSCREEN, IMAGO 500 or F3000.
Device Type 2 means devices that use a CompactFlash memory card for
retrieving the data from the device.
These are, for example, LOGOSCREEN es and LOGOSCREEN cf.