JUMO PCA Communications Software PCC (B 70.9702.0) - Manual (Page 68)

8 Menu Functions and Toolbar
68
8.3.2 Fetching Raw Data (Manually)
When raw data is fetched manually , a check in the device determines
what data is not yet in the set archive.
This command transfers only the data that is missing to the archive.
h Click the icon.
The missing data will be transferred to the selected archive in the PC.
8.3.3 Canceling the Procedure
The function is used to cancel a currently active process of the device
identified in the tree structure immediately.
H
The value for the memory alarm is reset and marked as “fetched”!
For Type 1 devices, please note the Times
➔ Advanced (1) tab
(Page 48).
H
Device type 2
Depending on the time taken for reading out and the speed of
storage, it is possible that data has been recorded after the start of
reading out, but not yet been read out. This data will be retrieved by
the next read-out procedure.
Device type 1
Data recorded after the start of reading out will be retrieved by the
next read-out procedure.
All device types
If manual retrieval has lasted for longer than 1 minute, automatic
read-out is performed again, and if necessary once more after that
(for a maximum of 3 times).