JUMO PCA Communications Software PCC (B 70.9702.0) - Manual (Page 57)

57
8 Menu Functions and Toolbar
8.1.4 Output orders
When outputs have been stopped (tick mark visible), data are no longer output
into output forms. Nevertheless, outputs will not be lost because they are en-
tered on a list with output orders.
In this case, after manual read out, the automatic start of PC Evalution soft-
ware PCA3000 is also deactivated (manual start by using button is possible).
In the window for output oders every device is shown with time and number of
outputs (e. g. batches):
v Chapter 4.2 "Windows of the User Interface"
After enabling outputs (tick mark removed), all outputs, which have been col-
lected till then, are carried out. PCA3000 is started automatically if manual
read out was used before.
The list with output orders can also increase even if outputs have not been
stopped. This happens temporarily when outputs cannot be processed as fast
as they are collected.
8.1.5 Default Settings
h File ➔ Default settings
h Set the preferred language and font
You can select the language of the PC program here as well as the font for
printer output.
The settings do not become active until the program has been restarted.
A tick mark means
that this bar or line is
visible