JUMO PCA Communications Software PCC (B 70.9702.0) - Manual (Page 67)

67
8 Menu Functions and Toolbar
v Additional information about using the data selection dialog can be found in
the PCA3000 Operating Manual (B 70.9701.0).
IMAGO 500 Another example of a device is the multi-channel process and program
controller IMAGO 500. For this device, it is only necessary to define the
amount of data to be read out as a percentage.
The archive is selected here.
Active ( ):
After reading out the data, the evaluation software
PCA3000 will be started automatically (if outputs are
not stopped).
The first archive that is found will be opened, depending
on the settings described under „Edit archive” on
page 63.
Active ( ):
After reading out the data, the evaluation software
PCA3000 will be started automatically (if outputs are not
stopped).
The first archive that is found will be opened, depending
on the settings described under „Edit archive” on
page 63.