JUMO PCA Communications Software PCC (B 70.9702.0) - Manual (Page 44)

6 Time Settings
44
Cycle type
Daily,
Weekly,
Monthly
Start time for next read-out of data
No change
If a change is made to the time settings, the new time will only take effect after the
next read-out.
Example: Read out will be performed Mondays at 8:00 AM. It is currently 7:00 AM
Monday. You set “Retrieve at” to 10:00 AM and leave the “Calculation of start date”
set to “No change.” The next read-out happens at 08:00 AM. Then the new setting
will be made for 10:00 on Monday of the following week.
Next valid date:
Depending on the setting, this is the next full hour, minute, or day – at
00:00:00 AM.
Immediate:
This takes the present day/time as the starting date, after which the new time is
calculated from the current setting. Caution: If the present time is outside the
operating period, there will be no read-out.
Time
for daily, weekly or monthly Weekday
for weekly or monthly