Kinze 4900 Front Folding Planter Rev. 5/14 - Manual (Page 16)

M0247-01 Model 4900
2-4 Rev. 5/14
TM
Machine Operation
TRACTOR REqUIREMENTS
Vacuum meter equipped planters require a 1¾"-20 spline 1000 RPM PTO to operate PTO-driven two section hydraulic
pump capable of supplying 15 gpm (56.8 Lpm) to two hydraulic motors/vacuum fans.
NOTE: A tractor model-specific mount kit is required for the PTO-mounted pump.
Contact GnL Engineering (319-227-7222) or Rowe
Manufacturing (800-544-4123) for your tractor pump mount
requirements.
Vacuum Seed Metering System operates from an 8 gal
(30.3 L) capacity oil reservoir.
VACUUM METER TRACTOR MOUNTED PTO PUMP AND PLANTER MOUNTED HYDRAULICS
WARNING
Loss of control of equipment during transport can result in death,
serious injury, or damage to property and equipment. Tractor gross
weight must be greater than planter gross weight with attachments
and options.
Consult your dealer for information on horsepower requirements and tractor compatibility. Requirements vary with planter
options, tillage, and terrain.
Three dual remote hydraulic outlets (SCV) are required on all sizes of conventional planters equipped with row markers.
Four dual remote hydraulic outlets (SCV) are required on all sizes of bulk fill planters equipped with row markers. A 12
volt DC electrical system is required on all sizes.
Six dual remote hydraulic outlets (SCV) are required on all sizes of planters equipped with vacuum meters but without
PTO pump.
Other dual fan system components include one oil cooler, one replaceable cartridge-type filter, and two pressure
compensating flow-control valves.
Two-section PTO Hydraulic Pump 8 gal (30.3 L) Reservoir
Vacuum Fan block
Fan block
NOTE: Check that open center plug is removed from fan
block before operating.
Oil reservoir