Kinze 4900 Front Folding Planter Rev. 5/14 - Manual (Page 22)

M0247-01 Model 4900
2-10 Rev. 5/14
TM
Machine Operation
TRANSPORT TO FIELD SEqUENCE USING ISObUS
Position planter in a relatively flat open area without furrows, etc.
SUMMARIzED TRANSPORT TO FIELD SEqUENCE
USING ISObUS VIRTUAL TERMINAL
NOTICE
Folding planter without using tractor to assist may cause equipment damage
especially in soft conditions or when loaded with seed or fertilizer. Use tractor
to reduce stress on frame, drive, and transport components.
1. Lower transport axle to field turnaround position.
2. Lower wing wheels into field turnaround position.
3. Lower drawbar or 2-point hitch to unhook wings.
4. Fold wings out, away from tractor. Planter is completely unfolded
when stub wings are latched into the H-frame.
5. Lower drawbar or 2-point hitch to level machine during planting.
6. Lower planter and hold hydraulic lever for an additional 10-15
seconds to rephase cylinders.
NOTE: Read following information for detailed instructions.