Kinze 4900 Front Folding Planter Rev. 5/14 - Manual (Page 40)

M0247-01 Model 4900
2-28 Rev. 5/14
TM
Machine Operation
FIELD TO TRANSPORT SEqUENCE USING CONTROL bOX
Position planter in a relatively flat open area without furrows, etc.
SUMMARIzED FIELD TO TRANSPORT SEqUENCE
USING CONTROL bOX
NOTICE
Folding planter without using tractor to assist may cause equipment damage
especially in soft conditions or when loaded with seed or fertilizer. Use tractor
to reduce stress on frame, drive, and transport components.
The control box and VT (virtual terminal) should not be used at the same time.
Make sure the markers are disabled on the VT when the control box is being
used to fold/unfold the planter.
Unfolding the planter without putting the tractor in neutral and allowing the
tractor to move may cause damage to the equipment.
1. Place function switch on control box in fold position.
2. Install row marker lockups.
3. Put tractor in neutral.
4. Lower planter to field turnaround position.
5. Fold the planter. Raise hitch to lock the wing hooks.
6. Lift planter to transport position.
7. Raise wing wheels.
NOTE: Read following information for detailed instructions.