Kinze 4900 Front Folding Planter Rev. 5/14 - Manual (Page 3)

TM
Model 4900 M0247-01
Rev. 3/14
Predelivery/Delivery Checklist
TO THE DEALER
Predelivery service includes assembly, lubrication, adjustment and test. This service helps ensure planter is delivered
to retail customer/end user ready for field use.
PREDELIVERY CHECKLIST
Use the following checklist after planter is completely assembled. Check off each item as it is found satisfactory or after
proper adjustment is made.
 Row units properly spaced and optional attachments correctly assembled.
 Row marker assemblies installed and adjusted at each end of the planter.
 Vacuum meter and bulk fill components properly installed (as applicable).
 All grease fittings in place and lubricated.
 All working parts move freely, bolts are tight, and cotter pins are spread.
 Check all drive chains for proper tension and alignment.
 Check for oil leaks and proper hydraulic operation.
 Hydraulic hoses correctly routed to prevent damage.
 Inflate tires to specified air pressure and torque wheel lug bolts and lug nuts as specified in the Operator Manual.
 All safety decals correctly located and legible. Replace if damaged.
 All reflective decals and SMV sign correctly located and visible when the planter is in transport position.
 Safety/warning lights correctly installed and working properly.
 Paint all parts scratched during shipment or assembly.
 All safety lockup devices on the planter and correctly located.
 Auxiliary safety chain properly installed and hardware torqued to specification.
 Vacuum fan PTO-driven pump correctly attached to tractor. Oil reservoir filled to capacity and system inspected for
leaks (If applicable).
Planter has been thoroughly checked and to the best of my knowledge is ready for delivery to the customer.
(Signature of Set-Up Person/Dealer Name/Date)
OWNER REGISTER
Name Delivery Date
Street Address Model No. 4900 Serial No.
City, State/Province Dealer Name
ZIP/Postal Code Dealer No.