Kinze 4900 Front Folding Planter Rev. 5/14 - Manual (Page 83)

TM
Model 4900 M0247-01
Rev. 5/14 6-1
Lubrication and Maintenance
LUbRICATION
Following pages show locations of all lubrication points. Proper lubrication of moving parts helps ensure efficient
operation of your Kinze planter and prolongs the life of friction producing parts.
LUbRICATION SYMbOLS
Lubricate at frequency indicated
with SAE multipurpose grease. Lubricate at frequency indicated with high
quality SAE 10 weight oil or spray lubricant.
WHEEL bEARINGS
All drive, transport, and marker hub wheel bearings should be repacked annually and checked for wear.
1. Raise wheel off ground.
2. Check for bearing endplay by moving wheel side to side.
3. Rotate wheel to check for bearing roughness. If bearings sound rough, remove hub and inspect bearings.
NOTE: To repack wheel hubs, follow procedure outlined for wheel bearing replacement in this section except
bearings and bearing cups are reused.
NOTICE
Disconnect all electronic monitor and control modules prior to
making any repairs or modifications to the planter or mounted
attachments. Failure to do so will result in permanent damage to
sensitive electronic components and could void your warranty.